200X56-rathi-Logo-4-2.png

TMT BARS

Building your dream house shouldn’t be a nightmare!

jindal-panther-steel-500x500.png
 

JSW NEOSTEEL BENEFITS

Highest level of purity

Manufactured from iron ore, JSW Neosteel TMT bars have the highest grade of purity and lowest sulphur and phosphorous content, making it strong. The Blast Furnace-LD Steel making- Ladle refining- Continuous casting of billets ensures the desired mechanical properties with minimum tramp elements. The sulphur and phosphorous content is restricted to 0.005% to 0.035%. This ensures good weldeability.

The extensive metallurgical operations followed by state of the art refining technologies which result in uniform chemical composition also ensure uniform physical properties that enhance strength, ductility and elongation of steel.

The HYQST technology ensures a uniform quality across the bar. The proof is a perfect ring that can be seen across any cross-section of the bar.

Due to the partial quenching (heat treatment), the micro structure of the bar consists of Tempered Martensite in the periphery and Ferrite Pearlite in the centre The strength to the bar is by Tempered Martensite layer while the ductility to the bar is incorporated by the Ferrite- Pearlite layer.

The perfect balance of strength and ductility in JSW Neosteel TMT bars results in a highly safe design with minimum use of reinforcement and at the same time making the structure safe against the action of earthquakes.

Consitent Quality

Best Bonding with cement

In case of RCC members, the tensile stresses from concrete are transferred to the steel reinforcement bars. The high tensile strength of steel complements the high compressive strength of concrete to result in a stable and safe Reinforced Cement Concrete structure. This is possible only if there is a perfect bond between the cement and the steel. This bond is made possible by the ribs present on the surface of TMT bars. In case of JSW Neosteel, Well-defined ribs that exceed the standard AR value specifications, ensure better bonding with cement. This makes the structure super resilient to the action of all kinds of loads.

Transparent Pricing

JSW Neosteel End Consumer Price, ensures transparency and uniformity in pricing across the state. JSW Steel believes in conducting business in a transparent manner. JSW Neosteel ECP ensures that our customers do not fall victims to the unfair and opportunistic practice of surge pricing adopted by ordinary TMT manufacturers.

 

TATA TISCON SD TMT BAR

Introduction:

Buildings and infrastructure in seismic zones have to be better prepared for earthquakes and so have special criteria for reinforcement. TATA Tiscon SD rebars are special grade rebars from Tata Steel and are particularly suited to meet these requirements. Its superior properties provide extra safety to constructions infrequent earthquake zones. TATA Tiscon SD is available in sizes from 6mm to 32mm.

 

Availability: 

TATA TISCON Super Ductile rebars are available in various sizes ranging from 8 mm to 40 mm rounds. They can be easily identified by the embossed SD mark on them. TATA TISCON Super Ductile rebars are supplied in standard lengths of 12 meters. However, lengths may be customized as per the site requirements.

Rathi Shaktiman

These are steel bars of Fe 500 grade made as per IS 1786-2008. Stringent quality control measures are adopted at the time of manufacturing so that TMT bars get the desired quality parameters. Proper selection of raw material to proper rolling and quenching gives us the best quality TMT bars. These bars are available in a wide range of diameters from 8mm to 32mm suitable for all types of requirement.

 

 

Rathi Shaktiman comes to you with the strength of:

• 3 state-of-the-art manufacturing plants in North India, with more in the pipeline

• Installed capacity of over 1000 tonnes per day

• In-house capacity of producing MS billets as raw material for producing high quality steel bars

• An integrated network of 900 dealers

• Global associations with Hennigsdorfer Stahl Engineering GmbH, Germany

• Globally the best technology-Thermex

• Global Quality Certifications for its products and manufacturing process such as IS:1786/1985, Grade Fe-415, Fe-500, ISO 14000 and ISO 9001

 
 

Jindal Panther TMT Rebars

TMT Rebars are integral to every construction project. During construction TMT rebars and concrete complement each other in a way that Reinforced Cement Concrete (RCC) structure can be moulded into any desired shape, with the rebars providing the requisite tensile strength to withstand the load.

Jindal PantherTM TMT Rebars are technologically advanced thermo-mechanically treated rebars which are superior to ordinary TMT in the market, owing to the state-of-the art manufacturing technology from leaders in rebar production- namely, HYQST Technology from MORGAN of USA (now Siemens USA), HYQST technology produces Rebars with high strength, high ductility and bendability and high weldability surpassing the requirements of Fe500D, 550D and 600CRS rebars.

Jindal PantherTM TMT Rebars are available in the following sizes as per IS: 1786-2008 for Concrete Reinforcement (in mm): 6 8 10 12 16 20 25 28 32 36 40 45* 50*

Applications

Residential Buildings
Commercial Complexes
Airports and Metro Rail
Industrial Structures
Roads, Bridges and Flyovers
Power Plants
Dams

Feel Free to Contact Us:

Mali Ram Sharma

  • Facebook
  • Instagram
  • Twitter
  • YouTube

©2019 by Salasar Steel.